User Guide for the CP920 HD IP Conference Phone
14
Power over Ethernet
With the included or a regular Ethernet cable, the CP920 IP conference phone can be powered
from a PoE-compliant switch or hub.
To connect the PoE:
1. Connect the Ethernet cable between the Internet port on the phone and an available port
on the in-line power switch/hub.
Note
Connecting the Optional USB Flash Drive
You can connect a USB flash drive to record calls/conferences and play back recorded files.
To connect a USB flash drive:
1. Insert a USB flash drive into the USB port on the phone.
If in-line power switch/hub is provided, you don’t need to connect the phone to the power
adapter. Make sure the switch/hub is PoE-compliant.
Important! Do not unplug or remove power to the phone while it is updating firmware and
configurations.
To Next Page
Loading...
