Yealink CP920 - Disconnecting the Wireless Network Connection; Deactivating the Wi-Fi Mode

Getting Started
23
To manage the Known Network(s) via phone user interface:
1. Tap Menu ->Settings -> Basic Settings->Wi-Fi->Known Network(s).
2. Tap the Option soft key.
3. Do the of the following:
- To edit the wireless network profile:
1) Select Edit from the prompt list.
2) Edit the desired wireless network information.
3) Tap the Save soft key.
- To change the priority of the wireless network:
1) Select Move Up or Move Down from the prompt list to improve or lower the
priority of the wireless network that the IP phone automatically connects to.
- To delete the desired saved wireless network profile:
1) Select Delete or Delete All from the prompt list.
If you delete your wireless network profile from your phone, you need to
manually connect to it next time.
Disconnecting the Wireless Network Connection
To disconnect wireless network via phone user interface:
1. Tap Menu ->Settings -> Basic Settings->Wi-Fi->X available networks (X is the
numbers of available networks).
2. Select the connected wireless network, and then tap the Disconnect soft key.
The wireless network is disconnected. You can tap the Connect soft key to connect again.
Deactivating the Wi-Fi Mode
To deactivate the Wi-Fi mode via phone user interface:
1. Tap Menu ->Settings -> Basic Settings ->Wi-Fi.