Yealink CP920 - Searching for Contacts

User Guide for the CP920 HD IP Conference Phone
48
You can also delete all contacts by tapping the Option soft key, and then select Delete All.
Placing Calls to Contacts
To place a call to a contact from the local directory:
1. Tap Directory from the Idle screen.
2. Select Local Directory.
If Local Directory is removed from the directory (refer to Directory on page 41), tap
Menu->Directory->Local Directory to enter the local directory.
3. Select the desired contact group and then tap the Enter soft key.
If the contact is not in any group, select All Contacts and then tap the Enter soft key.
4. Tap or to highlight the desired contact.
5. Do one of the following:
- If only one number for the contact is stored in the local directory, tap the Send soft
key to dial out the number.
- If multiple numbers for the contact are stored in the local directory, tap the Send soft
key to display a list of numbers.
Tap or to highlight the desired number.
Tap the Send soft key to dial out the number.
Searching for Contacts
To search for a contact in the local directory:
1. Tap Directory from the Idle screen.
2. Select Local Directory.
If Local Directory is removed from the directory (refer to Directory on page 41), tap
Menu->Directory->Local Directory to enter the local directory.
3. Tap the Search soft key.