Using Your Phone with SIP/Cloud Account
81
redial attempts.
To configure auto redial via phone user interface:
1. Tap Menu->Features->Auto Redial.
Tap the or soft key to select Enabled from the Auto Redial field.
2. Enter the desired time (in seconds) in the Redial Interval field.
The default time interval is “10”.
3. Enter the desired number of redial attempts in the Redial Times field.
The default value is “10”.
4. Tap the Save soft key to accept the change or the Back soft key to cancel.
Auto redial is configurable via web user interface at the path Features->General Information.
To use auto redial:
When the called party is busy, the LCD screen prompts the following:
1. Tap the OK soft key to activate auto redial.
The LCD screen prompts the following:
2. Wait for the designated period of time or tap the OK soft key to redial the phone number.
The phone will retry as many times as configured until the called party is idle.
Call Completion
You can use call completion to notify the caller who failed to reach a desired party when the
To Next Page
Loading...
