Yealink CP920 - Call Completion

User Guide for the CP920 HD IP Conference Phone
82
party becomes available to receive a call.
To configure call completion via phone user interface:
1. Tap Menu->Features->Call Completion.
2. Tap the or soft key to select Enabled from the Call Completion field.
3. Tap the Save soft key to accept the change or the Back soft key to cancel.
Call completion is configurable via web user interface at the path Features->General
Information.
To use call completion:
When the called party is busy, the following prompt will appear on the LCD screen of the
phone:
1. Tap the OK soft key, the phone returns to the idle screen and call completion is activated.
When the called party becomes idle, the following prompt will appear on the LCD screen of the
phone:
1. Tap the OK soft key to redial the number.
Note
Call completion is not available on all servers. For more information, contact your system
administrator.