Yealink CP935W - Pair the CP935 W with a Yealink W70 B Base Station; Enable Registration Mode on the W70 B Base Station

3. At the Unregistered prompt, select Reg.
Pair the CP935W with a Yealink W70B Base Station
Follow these steps to place your W70B base station into registration mode, and then register the CP935W phone with it:
Enable Registration Mode on the W70B Base Station
• Long press
on the base station until the handset LED flashes.
The base station will now be in Registration mode.
Note: If the base station does not identify a DECT phone within 90 seconds, the registration mode
will switch off automatically.
https://support.8x8.com/devices-accessories/phones/yealink/Yealink_CP935W_Phone_DECT_and_WiFi_Configuration
Updated: Fri, 09 Feb 2024 21:08:10 GMT
Powered by
2