14
Need support? Connect with us at www.northland.net/support or
Dial 4357 (HELP) or 315-671-6262 to speak to a Northland Training Representative
HANDLE A MOBILE CALL ON THE CP960
The CP960 will act as a handsfree speaker and microphone for your mobile device.
The call information appears on both the CP960 and the mobile phone screen. You can control the call’s audio to go
through the mobile phone or the CP960.
Choose Bluetooth to direct audio to the CP 960.
Choose Handset earpiece or speaker to direct the audio to the mobile phone.
TO PLACE A CALL
+ Tap the MOBILE ACCOUNT line key.
+ Place a call
+ Press SWITCH Softkey.
Select MOBILE ACCOUNT.
TO ANSWER A CALL
An incoming call to your mobile phone will also display on the Yealink phone
+ Tap ANSWER.
During the call you can hold/resume, mute/unmute or end the call from the Yealink phone.
DISCONNECT THE BLUETOOTH DEVICE
You can disconnect the paired Bluetooth device from the phone. When you disconnect a Bluetooth device, it remains paired
and you can reconnect it to your phone.
+ Select the Bluetooth icon.
+ Tap the connect mobile phone.
+ Tap OK.
DEACTIVATE BLUETOOTH MODE
After you deactivate the Bluetooth mode, the Bluetooth device will disconnect from the phone, but it remains paired and you
can reconnect it.
+ Tap the Bluetooth Icon.
+ Select TURN OFF BLUETOOTH.
+ Select SAVE.
To Next Page
Loading...
