Yealink CP960 - Page 112

User Guide for CP960 IP Phone
112
refer to Forwarding Incoming Calls on page 147.
Dependencies: Type (Key Event)
Key Type (FWD)
Label (key label displayed on the touch screen)
Value (the number you want to forward to)
Usage: Tap the forward key to forward an incoming call to the number specified in the Value
field.
Note
DND
You can use this key feature to enable or disable DND. You can also use this key feature to
access the custom DND screen. For more information, refer to Rejecting Calls with Do Not
Disturb (DND) on page 145.
Dependencies: Type (Key Event)
Key Type (DND)
Label (key label displayed on the touch screen)
Usage:
When DND is in phone mode:
1. Tap the DND key to enable DND.
2. Tap the DND key again to disable DND.
When DND is in custom mode:
1. Tap the DND key to access the custom DND screen. You can enable or disable DND for
one or all accounts.
Zero Touch
You can use this key feature to quickly configure auto provision and network parameters.
Dependencies: Type (Key Event)
Key Type (Zero Touch)
Label (key label displayed on the touch screen)
Usage:
1. Tap the zero touch key to access the zero touch screen.
2. Tap Update within a few seconds.
3. Configure the network parameters in the corresponding fields.
4. Tap .
5. Configure the auto provision parameters in the corresponding fields.
6. Tap .
If the Value field is left blank, the forward key performs the same function as when receiving
an incoming call.