Yealink CP960 - Account Management; Account Registration

User Guide for CP960 IP Phone
114
Account Management
You can register only one account on the CP960 IP phone. You can also configure each line key
to associate with an account or configure multiple line keys to associate with an account.
Account Registration
To register an account via phone user interface:
1. Tap Settings from the Home screen.
2. Enter the admin password (default password: admin) from the Advanced block.
3. Tap Accounts.
4. Tap the desired account.
5. Tap the Activation field.
6. Tap Enabled in the pop-up dialog box.
7. Enter the desired value in the Label, Display Name, Register Name, User Name,
Password and SIP Server1/2 field respectively. Contact your system administrator for
more information.
8. If you use the outbound proxy servers, do the following:
1) Tap the Outbound Status field.
2) Tap Enabled in the pop-up dialog box.
3) Enter the desired value in the Outbound Proxy1/2 and Fallback Interval field
respectively. Contact your system administrator for more information.
9. Tap to accept the change or to cancel.
You can repeat steps 3 to 8 to register more accounts.