Yealink CP960 - Configuring SCA Feature on the IP Phone

Advanced Phone Features
209
Configuring SCA Feature on the IP Phone
You can configure a primary account on the IP phone and other alternate accounts on the other
IP phones. In a SCA Hybrid Key System scenario, you can automatically assign multiple DSS keys
with Line type for a registered shared line on the phone (If auto linekeys feature is enabled). For
example, party A, party B share the account 4603, phone A registers the primary account 4603
and assigns line key 1 and line key 2 for the account 4603, phone B registers the alternate
account 4603_1 and assigns line key 1 and line key 2 for the account 4603_1, phone C registers
the account 4604.
To configure the auto linekeys feature via web user interface:
1. Click on Features-> General Information.
2. Select Enabled from the pull-down list of Auto LineKeys.
If Auto LineKeys is enabled, you can automatically assign multiple DSS keys with Line type
for a registered shared line on the phone.