Yealink CP960 - Web User Interface

Overview
21
Web User Interface
In addition to the phone user interface, you can also customize your phone via web user
interface. In order to access the web user interface, you need to know the IP address of your
new phone. To obtain the IP address, tap Settings and then tap General from the Status block
on the phone. Enter the IP address (e.g., http://192.168.0.10 or 192.168.0.10 for IPv4;
http://[2005:1:1:1:215:65ff:fe64:6e0a] or [2005:1:1:1:215:65ff:fe64:6e0a] for IPv6) in the address
bar of a web browser on your PC. The default administrator user name and password are both
“admin” (case-sensitive).
Note
The main options you can use to customize the IP phone via phone user interface and/or via
web user interface are listed in the following table:
Options
Phone User Interface
Web User Interface
Status
√
√
--IPv4
--MAC
--Firmware
--Network
--Phone
--Accounts
Basic Phone Settings
--Wallpaper
√
√
--Screen Saver
√
×
--Power Saving
×
√
--Backlight
√
--Language
√
--Input Method
√
×
--Time & Date
√
√
--Administrator Password
√
--Phone Lock
√
--Audio Settings
--Ring Tones
√
--Key Tone
√
--Touch Sounds
√
×
--Notification Sound
√
--Silent Mode
√
--Contact Management
√
--Local Directory
√
The access to the Advanced settings of the Account or Network via web user interface may be
blocked by the web browser (e.g., Chrome, Firebox) if you have installed “Adblock Plus plugin”.