Yealink CP960 - Configuring a Private Hold Key

Advanced Phone Features
213
The default value is 1. In this example, the value is set to 2.
4. Click Confirm to accept the change.
The phone B will automatically configure the line keys from the first unused DSS key, according
to the configured number in the Number of line key field.
Configuring a Private Hold Key
Public hold allows any shared line to retrieve the held call. Private hold only allows the hold
party to retrieve the held call. For example, you can retrieve the held call on either phone A or
phone B when you place a call on public hold; you can retrieve the held call only on phone A
when you place a call on private hold on phone A. You need to configure a private hold key
before you place the call on private hold.
To configure a private hold key via phone user interface:
1. Tap Settings from the Home screen.
2. Tap DSS Keys from the Features block.
3. Tap the desired line key.
4. Tap the Type field.
5. Tap Key Event in the pop-up dialog box.
6. Tap the Key Type field.
7. Tap Private Hold in the pop-up dialog box.