Yealink CP960 - Activating;Deactivating the Bluetooth Mode

User Guide for CP960 IP Phone
228
2. Turn on Bluetooth.
The IP phone scans the available Bluetooth device automatically. After scanning, the touch
screen displays the Bluetooth device information (device type and device name).
The touch screen displays the Bluetooth icon.
To deactivate the Bluetooth mode via phone user interface:
1. Do one of the following:
- Tap .
- Swipe down from the top of the screen to enter the control center.
Long tap Bluetooth.
- Tap Settings from the Home screen.
Tap Bluetooth from the Basic block.
2. Turn off Bluetooth.
The Bluetooth icon disappears from the status bar.
Bluetooth mode is configurable via web user interface at the path Features->Bluetooth.