Yealink CP960 - Setting the IP Phone as PC Audio Device

Connecting Bluetooth Devices and PC
239
Mute key LED indicators illuminate solid red. The touch screen indicates that the audio is
muted.
To unmute the microphone, do one of the following:
- Tap Mute again.
- Tap the Mute touch key again.
Adjusting the Volume of the PC Audio
To adjust the volume of the PC audio:
1. When you connect the PC audio, tap one of the Volume touch key to increase or decrease
the volume of the IP phone’s speaker.
Setting the IP Phone as PC Audio Device
If you connect a PC to the IP phone, the PC will use the IP phone to play audio from calls or
media by default. If not, you can set the IP phone as PC audio device. You can set the IP phone
as PC audio device via softphone or PC.
Setting the IP Phone as PC Audio Device via Softphone
When your PC is connected to the IP phone, you can set the IP phone as PC audio input and
output device via the softphone. Then you can play audio from the calls using the IP phone
speakers and use the IP phone as your microphone.
The following takes setting the IP phone as PC audio input and output device via Yealink VC
Desktop as example. If you do not have the Yealink VC Desktop application, download the
application from the Yealink VC Desktop Support page.