User Guide for CP960 IP Phone
54
4. Tap and then tap WPS-PIN.
The touch screen prompts “Enter pin XXX on your Wi-Fi router. The setup can take up to
two minutes to complete.”. Note the PIN code.
5. Log into the gateway/router management interface on your PC.
6. Locate the WPS Wizard configuration menu.
7. Enter the PIN code in the field that allows you to setup wireless devices by a PIN.
8. Click the corresponding button in the gateway/router’s web interface to search WPS
clients.
Once WPS setup is established successfully, the touch screen will prompt “Connected”.
Note
Manually Add a Wireless Network
If your gateway/router has SSID broadcast disabled, it might not appear in the scanning results.
In that case, you must manually add a wireless network.
To add a wireless network:
1. Tap Settings from the Home screen.
2. Tap Wi-Fi from the Basic block.
3. Turn on Wi-Fi.
Contact your gateway/router provider for more information.
To Next Page
Loading...
