Yealink CP960 - Page 55

Getting Started
55
4. Tap and then tap Add.
5. Enter the desired value in the Network SSID field.
6. Tap the Security field.
7. Tap the desired value.
- If you select WEP or WPA/WPA2 PSK:
1) Enter the password in the Password field.
- If you select 802.1x EAP:
1) Tap the EAP method field.
2) Tap the desired EAP method in the pop-up dialog box.
- If you select PEAP/TTLS:
a) Tap the Phase-2 authentication field.
b) Tap the desired Phase-2 authentication method in the pop-up dialog
box.
c) Enter the identity (username) in the Identity field.
d) Enter the anonymous identity (username) in the Anonymous identity
field (to be used as the unencrypted identity).
e) Enter the password in the Password field.
- If you select TLS:
a) Enter the username in the Identity field.
- If you select PWD:
a) Enter the username in the Identity field.
b) Enter the password in the Password field.