Yealink CP965 - Assembling the Phone; Wireless Network Connection

PC
B
A
7.5m
2N
7.5m
8J'J
P
P
C
C
PC
PC
Refer to Wireless Network
Connection mentioned below
for more information.
Note: The IP phone should be used with Yealink original PoE adapter (54V/0.56A) only. The use of the third-party PoE
adapter may cause the damage to the phone.
The cable should be replaced at once if its skin is broken.
Assembling the Phone
Connect the power and
wired network.
Wireless Network Connection
1. Swipe down from the top of the screen and long tap Wi-Fi, or tap More->Settings->Wi-Fi.
2. Turn Wi-Fi on.
The phone will automatically search for available wireless networks in your area.
3. Tap an available wireless network to connect.
4. If the network is secure, enter its password in the Password eld, and then tap Connect.
Connect the power and
wireless network.