Yealink MeetingBar A20/A30 Setup Guide
31
4.4 Controlling Local Cameras
If you do not enable the tracking mode feature, you can pan, tilt, or zoom the
camera when in a call or on the idle screen.
Note: If you enable auto-framing or speaker-tracking, the camera is adjusted
automatically and you cannot control it.
4.4.1 Enabling Manual Camera Control
Procedure
1. Go to More > Settings > Device settings > Advanced Feature (Admin
only, default password: 0000).
2. Turn on Quick Ball and select Camera Control.
To Next Page
Loading...
