6
Pair with the CTP18 (Optional)
For a better pairing experience, we recommend starting the A20 endpoint rst and then the CTP18.
If you purchased a combination kit, MeetingBar A20 and CTP18 would be paired automatically. You
can go to step 2 directly.
Find a networked computer and operate it
according to the interface prompts of CTP18 and
MeetingBar A20.
1. Pair manually: On the CTP18, enter the IP address of the MeetingBar A20 on display.
2. Initialize language, time zone, and auto update, and select the desired platform. If you
select Device Mode, refer to the Device Mode section.
3. Account login (Contact the corresponding service provider to obtain an account)
MeetingBar A20
CTP18
Zoom: Follow the prompts on CTP18 to sign in account.
Method 1: Sign in on the website Method 2: Sign in on the device
Use the remote control to operate it if your display
does not support touching.
Teams:
Sign in the same Microsoft Teams account on both CTP18 and MeetingBar A20.
Select the desired endpoint on the CTP18.
Enter the pairing code displayed on the endpoint on CTP18 and complete pairing.
CTP18 Pairing Video
(Teams)
CTP18 Pairing Video
(Zoom)
To Next Page
Loading...
