Yealink MeetingBar A30 - Advanced Camera Features

| Setting the Camera | 26
Adjusting the White Balance
To display high-quality video image, you can adjust camera white balance.
Procedure
1. On the idle screen, tap Settings > General > System Settings > White Balance Settings.
2. Select the desired value from the pop-up menu of White Balance Mode and save it.
Parameter Description
Auto We recommend that you use this setting for most situations. It calculates the
best white balance setting based on lighting conditions in the room.
Indoor /
Outdoor /
One push /
ATW Automatically adjust the white balance according to the picture took by the
camera.
Manual Setting Manually adjust the color temperature.
Temperature Configure the value of the color temperature.
Note: the value is from 2800K to 6800K. The default value is 5000K. You
can set this parameter only when the white balance mode is configured to
Manual Setting.
Adjusting the Display Image of the Camera
To display high-quality video image, you can adjust display mode of the camera or customize the image
display.
Procedure
1. On the idle screen, tap Settings > General > System Settings > Graphics.
2. Configure and save the following settings:
Parameter Description
Display Mode
Configure the display mode of the camera.
• High Definition
• Standard
• Warm
• Custom
Default: Standard.