Yealink MeetingBar A30 - System Settings; Setting the Language; Setting the Time and Date; Customizing the Time and Date

| Content Sharing | 29
Note: If the firmware version of WPP20 differs from that of MeetingBar A20/A30, the wireless
presentation software will prompt to update.
• Sharing Content via WPP20
• Switching the Shared Content via WPP20
• Stopping Sharing Content via WPP20
Sharing Content via WPP20
Before you begin
Make sure the computer is powered on and you connect the WPP20 wireless presentation pod to your PC.
Procedure
Do one of the following:
• On the WPP20, press the presentation button to share the full screen of the PC.
• On the WPP20, long press the presentation button for 3 seconds and then release this button. Select
the window you want to share and then click Start Sharing.
• On the Yealink Wireless Presentation Pod software, click Contents Share and choose the window you
want to share, and then click Start Sharing.
The computer content is automatically projected to the MeetingBar A20/A30.
Switching the Shared Content via WPP20
About this task
Procedure
1. On the Yealink Wireless Presentation Pod software, click New Share.