| System Settings | 37
Procedure
1. On the idle screen, tap Settings > General > System Settings > Admin Password.
2. Enter the administrator password (default: 0000) and tap Enter.
3. Enter the old password, the new password, the confirmed password, and save the change.
System Settings
The system settings support basic (language, date and camera, etc.) and advanced settings (network and
log, etc.) for CTP18 and MeetingBar A20/A30.
About this task
Note: If the system has enabled the lock settings feature, you need to enter the room password
before entering the system settings.
• Setting the Language
• Setting the Time and Date
• Single and Dual External Display
• Using Web User Interface
Setting the Language
Procedure
1. Tap Settings > General > System Settings > Language.
2. Select the desired language.
It prompts whether you are sure perform the action.
3. Confirm the action.
Setting the Time and Date
You can manually set the current the time and date. The format of the time and date is configurable.
• Customizing the Time and Date
• Editing Time and Date
Customizing the Time and Date
About this task
If the system cannot automatically obtain the precise time, you can manually enter the current time and
date.
Procedure
1. Tap Settings > General > System Settings > Time & Dates.
2. In the Type field, select Manual.
3. Set the time and date.
To Next Page
Loading...
