| Basic Settings | 21
Basic Settings
Sound
Keypad Tone Enable/disable the paired headset to produce a sound when pressing the
keypad keys.
Headset Volume Adjust the playback volume.
PC Softphone
Call Control with Softphone Enable USB call control or not.
Headset Local Ringtone Set whether a local ringtone is transmitted from the headset when a call
comes from a device connected via USB.
Note: If there is no ringtone in the headset when the call comes
in, you can enable this feature to make the headset plays the built-
in ringtone.
Default: Off.
Deskphone
Headset Local Ringtone Set whether the headset will play the local ringtone when the desk phone
has an incoming call.
Note: If this feature is enabled, the headset will play the built-in
ringtone when the phone has an incoming call. You can turn off
this feature via Yealink USB Connect. If the phone has its own
ringtone, you can disable the Headset Local Ringtone.
Default: On.
Advanced Settings
General
Audio Bandwidth Wideband provides batter audio, and narrowband provides better battery
life.
• Narrowband
• Wideband
Wireless Range
Select the wireless range between the headset and WDD60. When
the headset exceeds the preset wireless range, it will prompt you
out of range. If you experience signal interference from other wire
devices, select Medium or Short.
• Long: the wireless range is up to 150 m.
• Medium: the wireless range is up to 30 m.
• Short: the wireless range is up to 10 m.
To Next Page
Loading...
