| Advanced Settings | 22
Voice Guidance Enable/disable the paired headset to play voice prompts.
• Battery Low: battery < 5%
• Out of range
Voice Guidance Language Select the voice guidance from a list of 4 languages. Or choose Follow
screen language.
Default: English.
• English.
• Deutsch.
• French.
• Spanish.
Mute Reminder Enable/disable the paired headset to play a periodic audio reminder when
the microphone is muted.
Note: If the microphone boom-arm is moved down and the
headset is in the mute status during the call, the headset will play
a "Muted" audio reminder when the interval between two sound
sources detected by the microphone exceeds 5 seconds.
Mute Reminder Interval Configure the interval time to play a periodic audio reminder when the
microphone is muted.
Note: It appears only if Mute Reminder is enabled. Only when
you speak continuously, will the headset play the audio reminder
according to this configured period.
USB Computer Audio
This setting determines when your headset receives audio from a
connected PC.
Default: Instant.
• Instant: To have the audio (not call audio) turned on instantly.
• Delayed: To have the audio (not call audio) turned on automatically
with a brief delay. The delay will filter out short notifications sounds
from the PC.
• Never: To never have audio (not call audio) in the headset.
• Always: to always have audio in the headset, this will affect the
battery life.
Music Mode Turn on to optimize audio for music. Audio quality for calls are not
affected by this setting.
Default: On
Note:
• Audio quality for calls is not affected by this setting.
• Enable the music mode will affect the deployment density. For
more information about deployment density, refer to Yealink
WH6X Deployment and Density White paper.
Platform Change the platform between UC and Teams.
Note: If you want to change the platform, contact your Yealink
support team.
To Next Page
Loading...
