Yealink RoomPanel - Mount on the Glass

6
Note:
1. Clean the surface of the glass before gluing the 3M tape.
2. Press the 3M tape hard to help improve bond strength between the
glass and the mounting bracket.
3. Wait 1 hour after gluing the mounting bracket and install the RoomPanel
next.
Option 3: Mount on the Glass
Step 1: Glue the Mounting Bracket to the Glass
Step 2: Route the Ethernet Cable
Option 1 Option 2
Keep the facing up.
3M tape
Glass
A B
This guide mainly takes A 3M tape as an example for reference.
Choose A 3M tape if you route the cable in the wall, otherwise choose B.