Yealink SIP-T41S - Replace Rule Configuration

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 117 OF 150
account.1.hoteling.enable =
account.1.hoteling.user_id =
account.1.hoteling.password =
account.1.hoteling.auto_login_enable =
account.1.flexible_seating.enable=
account.1.hoteling.mode = %BWHOTELINGMODE-1%
account.1.hoteling.pin = %BWFLEXIBLESEATINGUNLOCKPIN-1%
##########################################################################
#############
## Broadsoft ACD
##
##########################################################################
#############
account.1.acd.enable =
account.1.acd.unavailable_reason_enable =
account.1.acd.available =
account.1.acd.initial_state =
##########################################################################
#############
## Broadsoft ACD Call Center
##
##########################################################################
#############
account.1.reason_code.1 =
account.1.reason_code_name.1 =
account.1.bw_disp_code.1 =
account.1.bw_disp_code_name.1 =
account.1.supervisor_info_code.1 =
account.1.supervisor_info_code_name.1 =
##########################################################################
#############
## Broadsoft Call Center
##
##########################################################################
#############
account.1.call_center.call_info_enable =
account.1.call_center.show_call_info_time =
account.1.call_center.disp_code_enable =
account.1.call_center.trace_enable =
account.1.call_center.emergency_enable =
account.1.call_center.queue_status_enable =
account.1.call_center.queue_status_light_enable =
##########################################################################
#############
## Broadsoft XSI ##
##########################################################################
#############
##It configures the user name for XSI authentication for account
X.Example:account.1.xsi.user = 3502@as.iop1.broadworks.net.
##The default value is blank.
account.1.xsi.user = %BWLOGIN-ID-1%
##It configures the password for XSI authentication for account
X.Example:account.1.xsi.password = 123456.
##The default value is blank.
account.1.xsi.password = %XSIPASSWORD-1%