Yealink SIP-T46G - Page 248

Appendix
235
Parameter-
network.secondary_dns
Configuration File
<y000000000028>.cfg
Description
Configures the secondary DNS server when
the Internet port type is configured as Static IP
Address.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
IP Address
Default Value
202.101.103.56
Range
Not Applicable
Example
network.secondary_dns = 202.101.103.6
Parameter-
network.internet_port.type
Configuration File
<y000000000028>.cfg
Description
Defines the Internet port type.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
0
Range
Valid values are:
0-DHCP
1-PPPoE
2-Static IP Address
Example
network.internet_port.type= 1
Parameter-
network.pppoe.user
Configuration File
<y000000000028>.cfg
Description
Configures the PPPoE username when the
Internet port type is configured as PPPoE.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.