Yealink SIP-T46G - Page 329

Administrator’s Guide for SIP-T46G IP Phone
316
X ranges from 1 to 6.
Y ranges from 1 to 2.
Format
Integer
Default Value
3600
Range
0 to 65535
Example
account.1.sip_server.1.failback_timeout =
3200
Parameter-
account.x.sip_server.y.register_on_
enable
Configuration File
<MAC>.cfg
Description
Enables or disables the IP phone to register
to the secondary server before sending
requests to the secondary server in the
failover mode.
X ranges from 1 to 6.
Y ranges from 1 to 2.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
account.1.sip_server.1.register_on_enable
= 1
Parameter-
network.lldp.enable
Configuration File
<y000000000028>.cfg
Description
Enables or disables the LLDP feature on the
IP phone.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled