Yealink SIP-T46G - Page 335

Administrator’s Guide for SIP-T46G IP Phone
322
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
account.1.nat.nat_traversal = 1
Parameter-
account.x.nat.stun_server
Configuration File
<MAC>.cfg
Description
Specifies the IP address or the domain
name of the STUN server for account X.
X ranges from 1 to 6.
Format
IP Address or Domain Name
Default Value
Blank
Range
Not Applicable
Example
account.1.nat.stun_server = 192.168.1.20
Parameter-
account.x.nat.stun_port
Configuration File
<MAC>.cfg
Description
Specifies the port of the STUN server.
X ranges from 1 to 6.
Format
Integer
Default Value
3478
Range
1024 to 65000
Example
account.1.nat.stun_port = 3479
Parameter-
network.snmp.enable
Configuration File
<y000000000028>.cfg
Description
Enables or disables the SNMP feature on
the IP phone.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.