Yealink SIP-T46G - Page 337

Administrator’s Guide for SIP-T46G IP Phone
324
Example
network.snmp.trust_ip = 192.168.1.50
server@manager.com
Parameter-
network.802_1x.mode
Configuration File
<y000000000028>.cfg
Description
Specifies the types of the 802.1X
authentication to use on the IP phone.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
0
Range
Valid values are:
0-Disabled
1-EAP-MD5
2-EAP-TLS
3-PEAP-MSCHAPV2
4-EAP-TTLS/EAP-MSCHAPv2
Example
network.802_1x.mode = 1
Parameter-
network.802_1x.identity
Configuration File
<y000000000028>.cfg
Description
Enters the identity used for authenticating
the IP phone.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
network.802_1x.identity = admin