Yealink SIP-T46G - Page 338

Appendix
325
Parameter-
network.802_1x.md5_password
Configuration File
<y000000000028>.cfg
Description
Enters the password used for
authenticating the IP phone.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It is only applicable to EAP-MD5,
PEAP-MSCHAPV2 and
EAP-TTLS/EAP-MSCHAPv2 protocols.
Format
String
Default Value
Blank
Range
Not Applicable
Example
network.802_1x.md5_password =
admin123
Parameter-
network.802_1x.root_cert_url
Configuration File
<y000000000028>.cfg
Description
Specifies the access URL of the root
certificate used for authentication.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It is only applicable to EAP-TLS,
PEAP-MSCHAPV2 and
EAP-TTLS/EAP-MSCHAPv2 protocols. The
format of the certificate must be *.pem,
*.crt, *.cer or *.der.
Format
String
Default Value
Blank
Range
Not Applicable
Example
network.802_1x.root_cert_url =
http://192.168.1.10/ca.pem
Parameter-
network.802_1x.client_cert_url
Configuration File
<y000000000028>.cfg
Description
Specifies the access URL of the client
certificate used for authentication.