Yealink T27 Series User Manual

VoIP Handset User Guide – Yealink T27 Series
6
Call functions and general use
Adjusting Volume:
The default volume set in the phone may not be appropriate, to change do
the following:
 Ringer: while phone is idle or ringing, press the volume up/down
button to the desired volume.
 In call volume: While a call is active, press the volume up/down
button to the desired volume.
NOTE: Each audio device (handset, speakerphone and headset) their
own audio levels
Answering a Call:
To answer a call, when phone is ringing;
 Pick up the handset, or
 Press the Speaker button, or
 Press the Headset button
Ending a Call:
 If you are using the handset, hang up
 If you are using the speaker, press the speaker button
 If you are using the headset, press the headset button
Initiating a Call:
1. To initiate a call, do one of the following:
a. Pick up the handset, or
b. Press the Speaker button, or
c. Press the Headset button
2. Dial the destination number on the keypad, wait for timeout or
press the Send soft key to dial immediately.

Yealink T27 Series Specifications

General

Brand	Yealink
Model	T27 Series
Category	Handsets
Language	English