Yealink T27 Series User Manual

VoIP Handset User Guide – Yealink T27 Series
8
Call Forward:
Call Forwarding will divert all incoming calls to another number, while Call
Forward is active the Call Forward icon will appear on the LCD screen.
NOTE: If the extension rings as part of a ring group, call forwarding must
be configured to occur AFTER the ring group times out or they will be
diverted as well.
1. Press Menu->Features->Call Forward
2. Press or to select the desired forwarding type, then press the
Enter soft key.
3. Depending on your selection:
a. Always Forward:
1) Press or , or the Switch soft key to select Enabled from
the Always Forward field.
2) Enter the destination number you want to forward all incoming
calls to in the Forward to field
b. Busy Forward:
1) Press or , or the Switch soft key to select Enabled from
the Busy Forward field.
2) Enter the destination number you want to forward all incoming
calls to in the Forward to field
c. No Answer Forward:
1) Press or , or the Switch soft key to select Enabled from
the No Answer Forward field.
2) Enter the destination number you want to forward all incoming
calls to in the Forward to field
3) Press or , or the Switch soft key to select the ring time
to wait before forwarding from the After Ring Time field.
4. Press the Save soft key to accept the change or the Back soft key to
cancel

Yealink T27 Series Specifications

General

Brand	Yealink
Model	T27 Series
Category	Handsets
Language	English