Yealink UH34 - Basic Call Operations; Call Control Functions

| Basic Call Usage | 7
Basic Call Usage
Headset Function Action
Answer call
Press the Answer/End Call button.
Note: When receiving an incoming call,
the Answer/End button LED flashes green.
During the call, the Answer/End button
LED glows green.
End call Press the Answer/End Call button.
Reject call
Double-press the Answer/End Call
button.
Redial
Double-press the Answer/End Call
button.
Hold/resume call
Hold the Answer/End Call button for 2
seconds.
Note: When a call is placed on hold, the
Answer/End button LED flashes green.