Yealink UVC84 - UVC84 Connection and LED Indicators; Connecting the UVC84 to a PC; Connecting to Video Conference System; LED Indicator Status Meanings

LED IndicatorLED Indicator
LED StatusLED Status DescriptionDescription
Off The UVC84 is powered off.
Solid green The UVC84 is active.
Solid red The UVC84 is in sleep mode.
Flash red The UVC84 is in recovery mode.
Flash yellow The UVC84 is upgrading firware.
 NOTENOTE
Not included accessories requirements:
» Display: Resolution of 1080p or higher and with an HDMI port.
» Ethernet cable: CAT5e or higher ethernet cable.
» PoE switch: If you use PoE to connect cameras, you need to use PoE+.
» PC: Equipped with HDMI or USB-C (support DP protocol) Port.
UVC84 Installation
6