User Guide for the VC120 Video Conferencing System
114
2. Select the Enabled from the pull-down list of Recording.
3. Click Confirm to accept the change.
To record video when the system is idle via the remote control:
1. Press to start recording and press again to stop recording.
To record video during a call via the remote control:
1. Do one of the following:
- Long press to start recording and long press again to stop recording.
- Press (More soft key) to open More screen.
Press or to scroll to USB Recording, and then press to start recording.
Open the More screen, scroll to USB Recording again, and then press to stop
recording.
To record video during a call via the video conferencing phone:
1. Press the Start REC soft key to start recording and press the Stop REC soft key again to
stop recording.
When you start recording, the display device will show and the recording time. When you
stop recording, the recording icon disappears from the screen. The display device prompts
“Successfully video recording!”
Note
If you start recording during a call, both your display device and remote display devices will show
the icon on your video image.
To Next Page
Loading...
