Yealink VC800 - Placing the CPW90; Charging the CPW90

User Guide for the VC800 Video Conferencing System
172
LED Status
Description
The CP960 conference phone is in a call and unmuted.
Slowly flashing red
The CP960 conference phone is receiving an incoming
call.
Solid red
The CP960 conference phone is muted.
Fast flashing yellow
The CPW90 is in the registration mode.
Slowly flashing yellow
The CPW90 has registered with the CP960 conference
phone, but the CPW90 is out of range.
The CPW90 has registered with the CP960 conference
phone, but the CP960 is turned off.
Flashing red and green
alternately
The CP960 conference phone is searching for the
CPW90 which has registered with it.
Off
The CPW90 is in the idle mode.
Placing the CPW90
The CPW90 has a rubber pads on its base to prevent it from sliding. You can place the CPW90
on a conference table. Do the following to ensure optimal voice quality:
 For registering to CP960 conference phone successfully, make sure the CPW90 is less than
20 meters distant from the CP960 conference phone.
 Place the CPW90 on a stable surface and keep it away from obstacles so that it can
effectively pick up sounds.
Charging the CPW90
If the CPW90 is not in use, we recommend you to charge the CPW90 even when the battery is
full.