User Guide for the VC800 Video Conferencing System
52
When Automatic is selected, the system will use daylight saving time corresponding to the
selected time zone.
12. Press or to select Save and then press to accept the change.
Note
To configure the time and date manually via the remote control:
1. Select (More menu).
2. Press or to scroll to Setting and then press to expand the menu.
3. Press or to scroll to Basic and then press to enter submenu.
4. Press or to scroll to Date & Time and then press .
5. Select the desired time format from the pull-down list of Time.
6. Select the desired date format from the pull-down list of Date.
7. Select the Manual Settings from the pull-down list of Time Type.
8. Select the desired year from the pull-down list of Year.
9. Select the desired month from the pull-down list of Month.
10. Select the desired day from the pull-down list of Day.
11. Select the desired hour from the pull-down list of Hour.
12. Select the desired minute from the pull-down list of Minute.
Please refer to Appendix A - Time Zones for the list of available time zones on the system.
To Next Page
Loading...
