Yealink VC880 - Customizing the Time and Date Format; Setting the Time Reminder

| Configuring Basic Settings | 110
Customizing the Time and Date Format
You can customize the time and date by choosing among a variety of time and date formats.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Date&Time.
• On your VCS, go to More > Setting > Basic > Date & Time.
On your VP59, tap Setting > Basic > Date & Time.
• On your CTP20, tap Setting > Basic > Date & Time.
2. Configure and save the following settings:
Parameter Description Configuration Method
Time Format
Configure the time format.
• Hour 12
• Hour 24
Default: Hour 24.
Web user interface
Endpoint
CTP20
Date Format/Date
Configure the date format.
The supported formats are as
below:
• WWW MMM DD
• DD-MMM-YY
• YYYY-MM-DD
• DD/MM/YYYY
• MM/DD/YY
• DD MMM YYYY
• WWW DD MMM
Default: YYYY-MM-DD.
Note:
WWW” represents the
abbreviation of the week;
“DD” represents a two-digit day;
“MMM” represents the first three
letters of the month;
“YYYY” represents a four-digit
year, and “YY” represents the last
two digits of the year.
Web user interface
Endpoint
CTP20
Setting the Time Reminder
The system displays a clock on the hour during a call. You can disable it if you do not want to pay attention
to time. This feature is not applicable to VP59.
Procedure
1. On your web user interface, go to Setting > Date&Time.