| Configuring the Audio Settings | 127
Specifying an Available Audio Input
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Video & Audio > Audio Settings.
• On your VCS:
On your VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Video & Audio > Audio
Settings.
On your VC200, go to More > Setting > Video & Audio.
On your VP59, tap Setting > Audio.
• On your CTP20, tap Setting > Audio.
2. Configure and save the following settings:
Parameter Description Configuration Method
Audio Input/Extended Audio
Input
Specify the audio input for the
system.
The supported types are as
follows:
• Auto - the audio output with
the highest priority.
• VCS Phone - the CP960
conference phone. (it is not
applicable to VP59)
• Built-in Microphone - the
VC200 built-in microphone.
• Bluetooth Microphone -
the CPW90-BT Bluetooth
wireless microphones. (it is
not applicable to VP59)
• Line Input- the audio input
device connected to the Line
In port on the VC800 codec
or to the RAC In port on the
VC880/PVT980 codec.
• USB to Line input - the
audio input device connected
to the USB port on the
VC200/VC500/PVT950/VP59
codec by using a USB to Line
input adapter.
Default: Auto.
Web user interface
Endpoint
CTP20
To Next Page
Loading...
