Yealink VC880 - Tones; Supported Tones

| Configuring the Audio Settings | 131
Procedure
1. On your web user interface, go to Setting > Video & Audio > Noise Suppression.
2. Configure and save the following settings:
Parameter Description Configuration Method
Temporal Noise Shaping(TNS)
Enables or disabled the Transient
Noise Suppressor (TNS).
• On—it can reduce the noise
volume temporarily and block
the noise in the voice.
• Disabled
Default: On.
Web user interface
Noise Barrier
Enables or disabled the noise
barrier feature.
• On—it can block the noise
when there is no speech in a
call..
• Off
Default: Disabled.
Web user interface
Tones
When receiving a message, the system will play a warning tone. You can customize tones or select
specialized tone sets (vary from country to country) to indicate different statuses of the system.
• Supported Tones
• Custom Tones Formats
• Customizing Tones
Supported Tones
The system supports the tone sets in the following countries. The tone set is a predefined by each country
according to different device status. The tone sets of different countries varies.
Available tone sets for the system are described as below:
Australia Austria Brazil Belgium
Chile China Czech Denmark
Finland France Germany Great Britain
Greece Hungary Lithuania India
Italy Japan Mexico New Zealand
Netherlands Norway Portugal Spain
Switzerland Sweden Russia United States