Yealink VC880 - Adjusting the Exposure

| Configuring Camera Settings | 155
2. Configure and save the following settings:
Parameter Description Configuration Method
White Balance Mode
Configure the white balance
mode of the camera.
• Auto—Yealink recommends
that you use this setting for
most situations. It calculates
the best white balance setting
based on lighting conditions
in the room.
• InDoor
• OutDoor
• OnePush
• ATW—automatically adjust
the white balance according
to the picture took by the
camera.
• Manual—manually adjust the
color temperature.
Default: ATW.
Web user interface
Endpoint
CTP20
Color Temperature
Configure the value of the color
temperature.
Note: the value is from 2800K
to 6800K. The default value is
the color temperature tested
in your current environment.
You can set this parameter only
when the white balance mode is
configured to Manual.
Web user interface
Endpoint
Adjusting the Exposure
To display the high quality video image, you can adjust the camera white balance. This feature is not
applicable to VP59.
• Configuring Auto Exposure Mode
• Configuring Manual Exposure Mode
• Configuring the Mode of Shutter Priority
• Configuring Aperture Priority
• Configuring the Mode of Brightness Priority
• Configuring the Mode of WDR-Auto
• Configuring WDR-Manual