| Configuring Call Settings | 177
2. Configure and save the following settings:
Parameter Description Configuration Method
Account Polling
Enable or disable the account
polling on the system.
• Off—the system dials a
number by using the call type
with the highest priority. If
you disable this feature, once
the dialed number differs
from the call type you are
using, you cannot place the
call.
• On—the system tries each
call type in order to dial a
number.
Default: On.
Web user interface
Related tasks
Placing a Call by Entering a Number
Configuring Additional Audio Call
If you enable this feature, when the number of video calls reaches the limit (except for 24-way video calls)
in the call, additional 5 users can still place audio calls to join the call. Otherwise, additional 5 users cannot
place audio calls to join the call.
About this task
For example, for VC800 with a 16-way license, if you disable additional audio call, when you create a call,
only 16 participants can place video calls to join your call, the 17th participant cannot join the call.
Procedure
1. On your web user interface, go to Setting > Call Features.
2. Configure and save the following settings:
Parameter Description Configuration Method
Additional Audio Call
Enable or disable the additional
audio call.
Default: On.
Web user interface
Selecting the Multi-party Resources
If you are during a P2P call, you can invite a third party using its own capacity (built-in MCU) or the server
VMR to initiate a conference.
About this task
The systems can select multi-party resources by the following:
To Next Page
Loading...
