Yealink VC880 - Configuring Call Match; Search Source List in Dialing; Configuring Search Source List in Dialing

| Configuring Call Settings | 179
Configuring Call Match
The call match feature allows the dialing screen to display the search result after you enter the search
criteria. This feature is not applicable to VP59.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Call Features.
• For your VC880/VC800/VC500/VC200/PVT980/PVT950, go to More > Setting > Call Feature.
2. Configure and save the following settings:
Parameter Description Configuration Method
Call Match
Enable or disable the call match
feature.
Default: On.
Web user interface
Endpoint
Search Source List in Dialing
The search source list in dialing allows you to search entries from the source list when the system is in the
dialing screen.
The source list includes History, Local Directory, Cloud Contacts, Enterprise Directory and LDAP. To make
the system search a specific list, you need configure the list first.
This feature is not applicable to VP59.
Note:
Cloud Contacts and Enterprise Directory appear in the search source list only when you log into the
corresponding platform.
If you want to match the LDAP list, make sure LDAP is already configured, refer to LDAP .
• Configuring Search Source List in Dialing
Related tasks
Configuring Call Match
Configuring Search Source List in Dialing
Procedure
1. On your web user interface, go to Directory > Setting > Search Source List In Dialing.
2.
Select the desired list from the Disabled column and click .
3. The selected search source list appears in the Enabled column.
4. Repeat step 2 to add more search source lists to the Enabled column.
5.
To remove a list from the Enabled column, select the desired list and then click .
6.
To adjust the search priority of the enabled search source lists, select the desired list, and click or
.