| Placing a Call | 197
Placing Calls from Call History
Procedure
Do one of the following:
• On your web user interface, go to Directory > History.
Click or beside the desired entry to place a video or audio call.
• On your VCS, go to Dial > History.
Select the desired history record and then press the right pan key to select Video Call or Voice Call.
On your VP59, select the desired call type and tap the desired entry.
If you want to place a voice call, long tap beside the desired contact, and then select Voice Call.
• On your CP960 conference phone, tap History.
Tap beside the desired history record and then tap Video Call or Voice Call.
• On your CTP20, go to Dial.
Select the desired call type and tap the desired entry.
If you want to place a voice call, long tap beside the desired contact, and then select Voice Call.
Placing a Call
You can use your system just like a regular phone to place calls in many ways.
• Placing a Call by Entering a Number
• Placing a Call from the Search Result
• Placing a Call from the Search Result by CTP20
• Editing Numbers Before Calling
• Editing Numbers before Calling by CTP20
Placing a Call by Entering a Number
You can place a call by using the web user interface, the remote control or the CP960 conference phone.
About this task
You can place a call to following account types:
• IP address (for example: 192.168.1.15)
• H. 323 account
• SIP account
• Cloud account
• PSTN account
• SIP URI (for example: 2210@sip.com)
Procedure
Do one of the following:
To Next Page
Loading...
