| Device Type Licenses and Multipoint Licenses | 42
Using CP960 Conference Phone
You can use the CP960 conference phone to perform calling and some configuration tasks. For more
information about how to use CP960 conference phone, refer to Yealink CP960 HD IP Conference Phone
Quick Reference Guide.
Device Type Licenses and Multipoint Licenses
• Licenses
• Multipoint Licenses
• Importing Device Type License/Multipoint License
Licenses
If your system is a demo machine, namely it is used by agents to demonstrate system functions to the
customers. The monitor will prompt “DEMO ONLY, NOT FOR RESELL”. A demo machine supports 24-
way calls (1 conference organizer and 24 participants). It is valid for one year. You can change the demo
machine to be a normal machine by importing a device type license. You can get the device type license
from Yealink technical support. After changing to a normal machine, the system supports 1 video call and 5
voice calls (1 conference organizer and 6 participants).
Multipoint Licenses
Only VC880/VC800/PVT980/PVT950 supports multipoint licenses. The PVT980 has a built-in 8-way
multipoint license and PVT950 has a built-in 4-way multipoint license. Only after importing multipoint
license can VC880/VC800 be used to initiate multi-party video conferences.
Multipoint licenses are described as below:
Multipoint License Type Maximum Connections Description
VC880/VC800/VC500/VC200
without a multipoint license
One video call with a presentation
and 5-way voice calls (a
conference moderator and 6
participants).
Multipoint video conferences are
unsupported.
PVT980 with an 8-way multipoint
license
8-way video call with a
presentation and 5-way voice call
(a conference moderator and 13
participants).
Multipoint video conferences are
supported.
PVT950 with built-in-4-way
multipoint license
4-way video call with a
presentation and 5-way voice call
(a conference moderator and 9
participants).
Multipoint video conferences are
supported.
To Next Page
Loading...
