Yealink VC880 - Logging into the Bluejeans Cloud Platform

| Configuring Account Settings | 95
Parameter Description Configuration Method
Transport
Specify the transport protocol
for transmitting the SIP
signaling.
The supported protocols are as
follows:
• UDP—it provides the best
transmission for SIP signaling.
• TCP—it provides a reliable
transmission for SIP signaling.
• TLS—it provides a safe
transmission for SIP signaling.
TLS is available only when the
device is registered on a SIP
server that supports TLS.
• DNS-NAPTR—the device
performs the DNS NAPTR
and SRV request to find the
service type and the port if
no server port is given.
Default: TCP.
Web user interface
Server Expires
The registration timeout (in
seconds) of the device.
After the timeout, the device will
send the registration request to
the server again.
Default: 3600 seconds.
Web user interface
Keep Alive Interval
Configure the interval (in
seconds) that the device sends
keep-alive messages to the SIP
server, so that the SIP server can
remain connected to the device.
Default: 30 seconds.
Web user interface
Note:
Yealink VCS also allows you to register a Pexip account via the standard H.323 or SIP protocol.
For more information, refer to Setting SIP Account/SIP IP Call and Setting H. 323 Account/H.323
IP Call .
Logging into the BlueJeans Cloud Platform
You can log into the BlueJeans Cloud platform and do the followings:
About this task
You can do the following things after logging into the BlueJeans Cloud Platform:
• Call into the Virtual Meeting Room to join the video conference with other devices.
• Receive meeting schedule from the BlueJeans Cloud platform.