Yealink VC880 - CPW90-BT Bluetooth Microphones

| Accessories with Your System | 101
•
Muting or Unmuting the Microphone
Placing CPE90 Wired Expansion Microphones
The CPE90 has a rubber pads on its base to prevent it from sliding. You can place the CPE90 on a stable surface and
keep it away from obstacles so that it can effectively pick up sounds.
Procedure
Place CPE90 Wired Expansion Microphones according to the image below.
Muting or Unmuting the Microphone
Procedure
On your CPE90 wired expansion microphones, tap to mute/unmute the microphone.
Using the Soundbar
The Soundbar can be used as the audio output device. It can be used directly after connected to the system.
VP59 cannot be used with a Soundbar. For more information about how to use the Soundbar, refer to
Yealink_Soundbar_Quick_Start_Guide.
Using the CPW90-BT Bluetooth Wireless Microphones with VCS
CPW90-BT Bluetooth wireless microphones can work as the audio input devices of your video conferencing system.
You can connect up to 2 CPW90-BT Bluetooth wireless microphones to the video conferencing system. For more
information on how to use CPW90-BT Bluetooth Wireless Microphones, refer to CPW90-BT Bluetooth Wireless
Microphones Quick Start Guide.
•
Viewing the Information of CPW90-BT Bluetooth Wireless Microphones by Remote Control
•
Viewing the Information of CPW90-BT Bluetooth Wireless Microphones by CTP20