| Getting Started | 17
Powering off the System
Procedure
1.
On your remote control, long press the Power Key for 3 seconds.
2.
Select Shut down.
The system shuts down immediately, and the LED on the system goes out.
Putting the System to Sleep
You can put the system to sleep immediately if you do not use it temporarily.
Procedure
1.
On your remote control, long press the Power Key for 3 seconds.
2.
Select Sleep.
The system goes to sleep immediately, and the LED on the system or the camera glows red.
Waking up the System
Procedure
Do one of the following:
• On your remote control, press any button.
• On your CP960, tap the touch screen or any key.
Screens and Icons
Before you use the system, you need familiarize yourself with the screen layouts and icons.
•
Idle Screen
•
CP960 Control Center/Notification Center
•
Icon Introduction
Idle Screen
•
The Home Page
•
Idle Screen of CP960
To Next Page
Loading...
