Yealink VC880 - Adding Conference Contacts

| Managing the Directory | 26
Adding a Local Contact by Remote Control
Procedure
1.
On your remote control, go to Dial > Directory.
2.
Select Local from the drop-down menu.
3.
Select New Contact.
4.
Enter the contact name in the Name field.
5.
Enter the contact number or IP address in the Number field.
6.
Select Add New Number to add more numbers.
You can repeat step 6 to add up to 3 numbers to a local contact.
7.
Select the desired bandwidth from the drop-down menu of Bandwidth.
The default bandwidth is Auto, which means the system will automatically select the appropriate bandwidth
during a call.
8.
Save the change.
Adding Conference Contacts
You can add up to 100 conference contacts to the system with a multiple license. A conference contact consists of
several local contacts, and you can quickly initiate a conference by calling a conference contact.
Note: The number of local contacts that you add to a conference contact depends on the imported multipoint
license. For example, if your system administrator imports a 24-way license to your system, up to 24 local
contacts can be added to a conference contact.
•
Adding a Conference Contact by Remote control
Related concepts
Multipoint Licenses
Adding a Conference Contact by Remote control
Procedure
1.
On your remote control, go to Dial > Directory.
2.
Select Conference Contacts from the drop-down menu.
3.
Select New Conference.
4.
Enter the group name in the Name field.
All the local contacts are displayed below the search box.
5.
Select the desired local contacts and add them to the conference contact.